Hypertherm – Plasma Cutting Products

Input voltages(± 10%)	CSA	200 – 240 V, 1-PH, 50-60 Hz
		480 V, 3-PH, 50-60 Hz1
	CE/CCC	230 V, 1-PH, 50-60 Hz
		400 V, 3-PH, 50-60 Hz
Input current @ 6.5 kW	CSA	200 – 240 V, 1-PH, 39/32 A
		480 V, 3-PH, 9.4 A1
	CE/CCC	230 V, 1-PH, 33 A
		400 V, 3-PH, 10 A
Output current	10–45 A
Rated output voltage	145 VDC
Duty cycle@ 40° C (104° F)	CSA	50% @ 45 A, 200 – 240 V, 1-PH
		60% @ 41 A, 200 – 240 V, 1-PH
		100% @ 32 A, 200 – 240 V, 1-PH
		50% @ 45 A, 480 V, 3-PH
		60% @ 41 A, 480 V, 3-PH
		100% @ 32 A, 480 V, 3-PH
	CE/CCC	50% @ 45 A, 230 V, 1-PH
		60% @ 41 A, 230 V, 1-PH
		100% @ 32 A, 230 V, 1-PH
		50% @ 45 A, 400 V, 3-PH
		60% @ 41 A, 400 V, 3-PH
		100% @ 32 A, 400 V, 3-PH
Open circuit voltage (OCV)	275 VDC (200 – 240 V, CSA/CE/CCC and 480 V, CSA)
	265 VDC (400 V CE/CCC)
Dimensions with handles	442 mm (17.4″) D; 173 mm (6.8″) W; 357 mm (14.1″) H
Weight with 6.1 m (20′) torch	CSA	14 kg (31 lbs.)
	CE/CCC	15 kg (33 lbs.)
Gas Supply	Cutting: air (clean, dry and oil-free), nitrogen, F5
	Gouging: air (clean, dry and oil-free), nitrogen, F5
	Marking: air (clean dry and oil-free) argon
Power supply type	Inverter – IGBT
Recommended gas inlet flow rate / pressure	188 I/min (400 scfh) @ 5,9 bar (90 psi)
Input power cable length	3 m (10′)
Power supply type	Inverter – IGBT
Engine drive requirement	12.5 kVA (10 kW) for full 45 A output
Electrical efficiency	88%
Recyclability	100%
Certifications	CSA certified for use in the Americas and Asia, except China. CCC for use in China. CE, RCM, GOST-TR, UkrSEPRO, and Serbian AAA for use in Europe, Australia, Belarus, Kazakhstan, Russia, Serbia, Ukraine, and other countries where accepted.
Warranty	Power supply: 3-year

Cut capacity

Capacity	Thickness	Cut speed
Recommended	20 mm (3/4″)	500 mm/min (20 ipm)
	25 mm (1″)	250 mm/min (10 ipm)
Severance (hand cutting)	32 mm (1-1/4″)	125 mm/min (5 ipm)
Pierce*	16 mm (5/8″)

*Pierce rating for handheld cutting, or mechanized cutting with programmable torch height control.

Maximum removal gouging

Groove profile

Capacity	Metal removal rate	Groove profile
Typical gouge	4.0 kg (8.8 lbs.) per hour	2.9 mm D x 6.4 mm W (0.11″ D x 0.25″ W)

General specifications

Input voltages	200–480 V, 1-PH, 50/60 Hz 200–600 V, 3-PH, 50/60 Hz
Kilowatt output	9 kW
Input current	200/208/240/480 V 1-PH 52/50/44/22 A @ 9 kW 200/208/240/480/600 V 3-PH 32/31/27/13/13 A @ 9 kW
Output current	20–65 A
Rated output voltage	139 VDC
Duty cycle @ 104° F	50% @ 65 A, 230–600 V, 1/3-PH 40% @ 65 A, 200–208 V, 1/3-PH 100% @ 46 A, 230–600 V, 1/3-PH
Open circuit voltage (OCV)	295 VDC
Dimensions with handles	483 mm D; 233 mm W; 430 mm H (19″ D; 9.2″ W; 17″ H)
Weight w/7.6 m (25′) torch	29 kg (61 lbs.)
Gas supply	Clean, dry, oil-free air or nitrogen
Optimum inlet gas pressure	7.6–8.3 bar (110–120 psi)
Minimum inlet gas pressure	5.2 bar (75 psi)
Recommended inlet gas flow rate	Cutting: 210 I/min @ 5.9 bar (450 scfh, 7.5 scfm @ 85 psi) Gouging: 210 I/min @ 4.8 bar (450 scfh, 7.5 scfm @ 70 psi)
Input power cable length	3 m (10′)
Power supply type	Inverter – IGBT
Engine drive requirement	15 kW for full 65 A output
Certifications	CSA-certified for use in the Americas and Asia, except China
Warranty	Power supplies have a 3-year warranty and torches a 1-year warranty

Cut capacity

Capacity	Thickness	Cut speed
Recommended	25 mm (1″)	500 mm/min (20 ipm)
	32 mm (1-1/4″)	250 mm/min (10 ipm)
Severance (hand cutting)	38 mm (1-1/2″)	125 mm/min (5 ipm)
Pierce*	20 mm (3/4″)

*Pierce rating for handheld cutting, or mechanized cutting with programmable torch height control.

Maximum removal gouging

Capacity	Metal removal rate	Gouge profile
Typical gouge	8.2 kg (18.2 lbs.) per hour	3.5 mm D x 6.6 mm W (0.14″ D x 0.26″ W)

General specifications

Input voltages	200–480 V, 1-PH, 50/60 Hz 200–600 V, 3-PH, 50/60 Hz
Kilowatt output	12.2 kW
Input current	200/208/240/480, 1-PH 70/68/58/29 A @ 12.2 kW 200/208/240/480/600 V, 3-PH 42/40/35/18/17 A @ 12.2 KW
Output current	25–85 A
Rated output voltage	143 VDC
Duty cycle @ 104° F	60% @ 85 A, 230–600 V, 3-PH 60% @ 85 A, 480 V, 1-PH 50% @ 85 A 240 V, 1-PH 50% @ 85 A, 200–208 V, 3-PH 40% @ 85 A, 200–208 V, 1-PH 100% @ 66 A, 230–600 V, 1/3-PH
Open circuit voltage (OCV)	305 VDC
Dimensions with handles	483 mm D; 233 mm W; 430 mm H (19″ D; 9.2″ W; 17″ H)
Weight w/7.6 m (25′) torch	32 kg (67 lbs.)
Gas supply	Clean, dry, oil-free air or nitrogen
Optimum inlet gas pressure	7.6–8.3 bar (110–120 psi)
Minimum inlet gas pressure	5.2 bar (75 psi)
Recommended inlet gas flow rate	Cutting: 210 I/min @ 5.9 bar (450 scfh, 7.5 scfm @ 85 psi) Gouging: 210 I/min @ 4.8 bar (450 scfh, 7.5 scfm @ 70 psi)
Input power cable length	3 m (10′)
Power supply type	Inverter–IGBT
Engine drive requirement	20 kW for full 85 A output
Certifications	CSA-certified for use in the Americas and Asia, except China
Warranty	Power supplies have a 3-year warranty and torches a 1-year warranty

Cut capacity

Capacity	Thickness	Cut speed
Recommended	32 mm (1-1/4″)	500 mm/min (20 ipm)
	38 mm (1-1/2″)	250 mm/min (10 ipm)
Severance (hand cutting)	50 mm (2″)	125 mm/min (5 ipm)
Pierce*	22 mm (7/8″)

*Pierce rating for handheld cutting, or mechanized cutting with programmable torch height control.

Maximum removal gouging

Capacity	Metal removal rate	Gouge profile
Typical gouge	8.6 kg (19.1 lbs.) per hour	6.6 mm D x 6.0 mm W (0.26″ D x 0.24″ W)

General Specification

Input voltages	200–600 V, 3-PH, 50/60 Hz
Kilowatt output	16.8 kW
Input current	200/208/240/480/600 V, 3-PH 58/56/49/25/22 A @ 16.8 kW
Output current	30–105 A
Rated output voltage	160 VDC
Duty cycle @ 104° F	70% @ 105 A, 240 V, 3-PH 80% @ 105 A, 480–600 V, 3-PH 100% @ 94 A, 480–600 V, 3-PH 100% @ 88 A, 240 V, 3-PH
Open circuit voltage (OCV)	300 VDC
Dimensions with handles	592 mm D; 274 mm W; 508 mm H (23.3″ D; 10.8″ W; 20.0″ H)
Weight w/7.6 m (25′) torch	45.3 kg (95 lbs.)
Gas supply	Clean, dry, oil-free air or nitrogen
Optimum inlet gas pressure	7.6–8.3 bar (110–120 psi)
Minimum inlet gas pressure	5.5 bar (80 psi)
Recommended inlet gas flow rate	Cutting: 260 I/min @ 5.9 bar (550 scfh, 9.2 scfm @ 90 psi) Gouging: 260 I/min @ 4.8 bar (550 scfh, 9.2 scfm @ 70 psi)
Input power cable length	3 m (10′)
Power supply type	Inverter–IGBT
Engine drive requirement	30 kW for full 105 A output
Certifications	CSA-certified for use in the Americas and Asia, except China
Warranty	Power supplies have a 3-year warranty and torches a 1-year warranty

Input voltages	CSA	480/600 V, 3-PH, 50/60 Hz
	CE	400 V, 3-PH, 50/60 Hz
	CCC	380 V, 3-PH, 50/60 Hz
Input current @ 21.9 kW	300/400/480/600 V, 38/36/31/24 A
Output current	30 – 125 A
Rated output voltage	175 VDC
Duty cycle @ 40°C (104°F)	100% @ 125 A
Open circuit voltage (OCV)	400/600 CSA: 320 VDC
	380 V CCC: 290 VDC
	400 V CE: 305 VDC
Dimensions with handles	592 mm D; 274 mm W; 508 mm H (23.3″ D; 10.8″ W; 20.0″ H)
Weight with 7.6 m (25′) torch	480 V, 47,9 kg (105.7 lbs)
	600 V, 47,5 kg (104.7 lbs)
	380 V, 45,2 kg (99.6 lbs)
	400 V, 48,9 kg (107.8 lbs)
Gas Supply	Clean, dry, oil-free air or nitrogen
Recommended gas inlet	Cutting: 260 l/min (550 scfh) @5.9 bar (85 psi)
flow rate / pressure	Gouging: 212 l/min (450 scfh) @4.1 bar (60 psi)
Input power cable length	3 m (10′) *
Power supply type	Inverter – IGBT
Engine drive requirement	40 kW for full 125 A output
Certifications	CSA-certified for use in the Americas and Asia, except China.
	CE, C-Tick, CU/GOST, Ukr, and Serbian — for use in Europe, Australia, Belarus, Kazakhstan, Russia, Serbia, Ukraine, and other countries where accepted.
	CCC for use in China.
Warranty	Power supplies have a 3-year warranty and torches a 1-year warranty.

MAXPRO200 plasma system

The MAXPRO200® LongLife® plasma cutting product is engineered for heavy-duty, high-capacity automated and handheld cutting and gouging applications. The easy-to-use Powermax plasma cutting product operates with either air, oxygen, or nitrogen plasma gas and combines fast cutting speeds with quick process changes to maximize productivity. Advanced Hypertherm consumable designs, including LongLife® technology, improve cut consistency and significantly increase consumable life to lower your cost per part.

Duramax™ torches are the pinnacle of performance and reliability and can improve performance and productivity. They are crafted to integrate with Hypertherm’s cutting systems. SFTC has Handheld and machine versions that allow operators to achieve intricate cuts with ease. SpringStart™ electrode technology eliminates moving parts in the torch for more reliable arc ignition. These torches exhibit remarkable resilience and longevity, ensuring consistent, high-quality cuts over time. Hypertherm continues to empower professionals across various sectors with the tools they need.

A complete line of Powermax plasma-cutting products and plasma consumables for HPR are available on SFTC. These consumables and spares are imported from his Hypertherm factory in the USA or the Netherlands and shipped in original Hypertherm packaging.

Whether you’re in need of plasma-cutting equipment or replacement parts, SFTC provides access to the genuine Hypertherm components that drive excellence in plasma-cutting technology.